F12/030/040/060/080/090/110/125/152/162/182/250 Parker Hydraulic Pump/Motor

F12/030/040/060/080/090/110/125/152/162/182/250 Parker Hydraulic Pump/Motor

Parker F12 is a bent-axis, fixed displacement motor/pump. It can be used in numerous applications in both open and closed loop circuits.
The F12 series is available in sizes 30, 40, 60, 80, 90, 110, 125, 152, 162, 182 and 250 cc.
F12 Features
• Max intermittent pressure up to 480 bar and continuous operating pressure up to 420 bar • The 7 or 9 piston design provides high start-up torque and smooth motor operation 
• ISO, Cartridge and SAE versions
F12-030 F12-040 F12-060 F12-080 F12-090 F12-110 F12-125 F12-152 F12-162 F12-182 F12-250 Parker F12 Motor Pump 
Details regarding the choice of hydraulic fluid     
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range (νopt) - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (νopt; shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters, please consult us.
Hydraulic pump test stand,Hydraulic Motor Test Stand,Gear Pump Test Bench
https://jinanyy.en.alibaba.com
http://www.yuanyihyd.com/en/
whatsapp:+8615154196819
email:admin@chinasdhydraulic.com
https://twitter.com/rexrothpump
https://www.facebook.com/Yuanyihyd